Provision of full-service engineering capabilities to support each customer's project and implementation needs.
1) All the information on the TDR is required for the submitting a technical evaluation. In particular, the feed composition
(carbon breakdown and/or impurity breakdown) and the particular type of contaminates (i.e. for chloride guard, in addition to HCl
content, we would also like to know potential contaminates such as H2S
and H2O).
2) The normal/average levels
of impurity should also be listed (on the TDR only the Max and Min are listed). The normal impurity content is not always the
average of the max and min (particularly cyclic units).
3) Current loading diagram is also helpful in understanding the
internals and possible recommended changes (i.e. different support/topping size/layer or short loading)
